Laura Bittner, from the U.S. Army Corps of Engineers, presents information about a new modeling tool to the Flood Advisory Committee of the Delaware River Basin Commission, meeting at the United States Geological Survey offices in Lawrenceville, N.J. on Sept.7. Photo by Meg McGuire
DRBC committee hears presentations on flood preparedness, management
Floods and their prevention is the main focus of the Delaware River Basin Commission’s Flood Advisory Committee. At its meetings, held quarterly, a veritable brains trust gets together either in person or via conference call to share information. Members are from federal organizations such as the United States Geological Survey, the Federal Emergency Management Agency, the National Weather Service, the National Parks Service and the Natural Resources Conservation Service. In addition, there are people from the four-state watershed (and New York City), including academics and professionals in various state agencies, as well as members from business and industry and the U.S. Army Corps of Engineers.
The most recent meeting was held on Sept. 7, 2016, at the USGS New Jersey Water Science Center in Lawrenceville, N.J.
To bring the topics discussed at this meeting available to a wider audience, I've asked presenters at this meeting to give a brief overview of their presentation.
First up, Anni Shelton, grants program specialist for FEMA Region II, gave abrief overview of how FEMA is encouraging applicants to utilize nature-based infrastructure strategies in Hazard Mitigation Assistance project proposals. She wrote:
FEMA provides funding for hazard mitigation projects through three Hazard Mitigation Assistance (HMA) grant programs: Hazard Mitigation Grant Program, Flood Mitigation Assistance and Pre-Disaster Mitigation. Eligible applicants include any State agency, local government, Indian tribal government or eligible nonprofit organization that submit an application for assistance under the Hazard Mitigation Assistance program.
In 2013, FEMA introduced an environmental benefits policy to enable applicants to incorporate ecosystem benefits into their project’s Benefit-Cost Analysis (BCA). Any project that demonstrates a benefit-cost ratio of .75 or greater is eligible to incorporate environmental benefits into the analysis to increase the cost-effectiveness of the project. Initially, this policy was only applicable to acquisition and open-space project types. However, in 2015, FEMA released four new project types referred to as Climate Resilient Mitigation Activities (CRMA), which can help communities reduce risks associated with climate change. These activities include: Aquifer Storage and Recovery, Floodplain and Stream Restoration, Flood Diversion and Storage, and Green Infrastructure Methods. This year FEMA released fact sheets, job aids, BCA tools and an ecosystem services benefits calculator to help applicants design project proposals.
The next presenter was Kunal Patel, a principal engineer in the NJ State NFIP Coordinator's Office, Office of Dam Safety & Flood Control, New Jersey Department of Environmental Protection. His presentation was on Non-Regulatory Flood Insurance Products for the NJ Delaware Bay Area.
We are currently finalizing the non-regulatory project for Delaware bay counties. The final products for coastal areas of Cumberland, Salem, Gloucester, and Camden counties will be available soon.
More on draft products on be found here.
Non-regulatory means that they are not intended to be used as the basis for official actions required under the NFIP (such as mandatory insurance purchase requirement, construction requirements, etc). Please see FEMA's website for details.
And lastly, Laura Bittner, the chief of the Hydrology, Hydraulics and Coastal Section of the U.S. Army Corps of Engineers in the Philadelphia Region, spoke about USACE's Corps Water Management System (CWMS). Below are excerpts from the fact sheet about the project.
"If only people realized that they were not the most important creatures living on the Earth, I think the world would be a much better place." – Rebecca Pisall
Her death started a movement. Click here to learn more.
U.S. Army Corps of Engineers Water System Management
The U.S. Army Corps of Engineers (USACE) is implementing the Corps Water Management System (CWMS), a data acquisition and visualization tool, in watersheds across the country. The system is designed to provide real-time decision support for the USACE water management mission. This includes the ability to make short-term forecasts of flow rates, stages, economic impacts and actions that could be taken to mitigate the effects of flooding in the watershed.
The system offers features that most water managers need to perform operational analyses on a daily basis. The system also provides enhanced tools to help water resources professionals to comprehensively evaluate alternatives, visualize impacts, and support water management decisions.
During the CWMS implementation occurring in watersheds with USACE projects throughout the country, discrete models will be developed that will be linked together using a central visualization interface. The models include a hydrologic model (HEC-Hydrologic Modeling System), a hydraulic model (HEC-River Analysis System), a reservoir model (HEC-Reservoir System Simulation), and a consequences model (HEC-Flood Impact Analysis). These tools can be used to forecast events in real time; evaluate historic or hypothetical events; provide inundation mapping and consequence analysis; and evaluation of current and future portfolio of water resources projects.
Delaware River Model
A CWMS team will develop the implementation models for the Delaware River Basin over the upcoming months with the goal to be completed in the Summer of 2017. The scope will be discussed with the Delaware River Basin Commission (DRBC) to determine what watershed needs could be incorporated.
Delaware River Existing Data Needs
Existing data from watershed modeling efforts such as the Federal Emergency Management Agency’s Delaware River hydraulic model and the reservoir simulation model from the Flood Analysis Model Study will be utilized. Additional data that would benefit the model include:
• Model data or lessons learned from models such as the NJDEP RiverWare, DRBC-PST, USGS WATER, and others
• River (underwater) sections within the Schuylkill, Lehigh or Lackawaxen Rivers or the E. or W. Branches of the Delaware River
• Bridge geometry or plans along those rivers
• High water marks for past storm events throughout the basin
• As-built drawings from non-USACE levee systems
• Pertinent data and operations manuals for non-USACE reservoirs
To provide data to help the modeling effort, please submit to: PDPA-NAP@usace.army.mil
Source: U.S. ARMY CORPS OF ENGINEERS PHILADELPHIA DISTRICT
© 2017 Delaware Currents | PO Box 306 | Port Jervis, New York 12771